thumbnail AES Prestigewall

AES Prestigewall

Our flagship modular cleanroom wall.

The AES prestigewall cleanroom system is another AES hallmark system, a 2” [50mm] thick modular wall system with a uPVC finish, with all seams cold welded together to create a monolithic finish. The reduced wall cross section with all flush finishes at doors and windows provides a superior performing system.

thumbnail AES Marquee

AES Marquee

Walkable cleanroom ceiling.

The cleanroom ceiling that started the walkable revolution, innovated and designed inhouse by AES engineers. The AES marquee system is AES’ hallmark system, a walkable monolithic ceiling system with an uPVC finish, with all seams cold welded together to create a monolithic finish. This system comes in either 2” [50mm] or 3” [75mm] thick, depending upon the application.

thumbnail AES Litebeam Ceiling

AES Litebeam Ceiling

Integrated LED linear lighting.

The AES litebeam is a patented and one-of-a-kind 4” [100mm] wide linear LED light which is fully flush and integrated into the 3” [75mm] AES marquee ceiling system, providing a fully flush surface on both surfaces of the ceiling. These lights have a lighting level dimmable controller, and provide greater flexibility when locating HEPA air filter diffusers in the cleanroom ceiling system.

thumbnail AES Infinity Glass Wall System

AES Infinity Glass Wall System

High Visibility Cleanroom Wall

When transparency is paramount, the AES infinity system provides the viewer with a close-up and very clear viewing experience, enabling interested personnel to see the process without entering the cleanroom environment. The AES infinity glass wall system is easily integrated with other wall systems.

thumbnail AES W.O.L.F. Light

AES W.O.L.F. Light

AES' Walk On Light Fixture

The W.O.L.F. Light was developed in partnership with safety groups at leading pharmaceutical companies. The WOLF Light is designed with a flush top and structural reinforcement built-in, effectively preventing a potential trip hazard that exists with other units, and possible fall-through while servicing the light is easy to clean and comes in a 2×2 or 2×4 configuration. These easy-to-clean fixtures meet IP65 ingress protection, ensuring both protection against particulate contamination and integrity of pressurized plenums where applicable. The unit is designed to meet the highest cleanliness standards and most stringent cleaning protocols – including those that may involve caustic chemicals and extreme abrasion.

Product Features and Benefits:

  • Recessed ceiling mount; flange, top access lift-off lid – 1’×4’, 2’×2’, 2’×4’
  • One-piece overlapping door for 2” or 3” thick AES Ceiling
  • No visible fasteners on roomside
  • Long-life efficient LED lamp sources for accurate color rendition and lighting performance
  • UL and CUL listed for wet locations; UL classified IP65
  • 2” or 3” AES Ceiling System
  • AES2ROL/AES3ROL LED Series
thumbnail AES Adaptwall

AES Adaptwall

1/2" uPVC wall liner system

The AES adaptwall is a ½” [12mm] thick uPVC cleanroom wall liner system, attached to steel studs using the AES attachment system. All seams are cold welded together to create a monolithic finish. The system includes Z-Clip brackets to attach to a metal stud framing system provided by others. Also included is powder coated aluminum floor angle which is secured through a galvanized steel base channel to accept flush floor cove by others.

thumbnail AES Parasol

AES Parasol

Non Walkable Ceiling

The AES parasol system consists of a ½” [12mm] thick, non-walkable monolithic ceiling system with a uPVC finish, with all seams cold welded together to create a monolithic finish.

thumbnail AES Wallbeam

AES Wallbeam

Prewired + Prepiped Raceway

The AES Wallbeam is allows you to put piping and outlets anywhere in your room. Even though our wall panels have a raceway on both sides of the panel, some clients need additional flexibility. The Wallbeam elegantly solves this problem while moving construction offsite and improving safety.